top of page

Outgrowing Your 64-Inch Sublimation Printer? When to Step Up to a 1.9 m Fedar Production System

7 hours ago
6 min read

A 64-inch dye-sublimation printer is the workhorse of many apparel and soft-signage shops. Machines like the Mutoh XpertJet 1642WR Pro and other 64-inch production printers, including Epson's, handle a wide range of work very well. As a shop grows, though, the questions change. The issue is no longer whether the printer can make the job. It's whether one printer can keep up with the order book. This guide covers the signs that you have outgrown 64 inches, what changes when you move to a 1.9 m (75-inch) Fedar roll-to-roll system, and how to pick the right head count. Fedar specs come from the model pages on impact-usa.com.

Impact USA is the exclusive US distributor of Fedar and an authorized Mutoh dealer, so we sell both sides of this decision. For many shops, the right answer is a second 64-inch printer or simply better workflow. For others, it's time to step up.

Signs you've outgrown a 64-inch printer

  • The printer runs overnight just to keep up. If your queue only clears by running nights and weekends, you have no room for a rush order or a busy season.

  • Your presses and sewing team wait on printing. When the calender press or cut-and-sew line sits idle waiting for transfer paper, printing has become the bottleneck for the whole shop.

  • You're changing rolls constantly. On long runs, roll changes and partly used rolls eat operator time and paper.

  • Your layouts don't fit the width. Large sportswear panels, wide banners and soft-signage graphics need more than about 63 inches of print width. Otherwise you split graphics or waste paper at the edges.

  • You're turning work away. If you're quoting longer lead times than your competitors or passing on bulk team and event orders, capacity is costing you sales.

If one or two of these sound familiar, start by tuning print modes, RIP settings and your schedule. If most of them sound familiar, read on.

What changes at 1.9 m

All of the Fedar roll-to-roll sublimation printers below share the same platform. These details are on every model page:

  • 1,900 mm (about 75-inch) print width, compared with roughly 64 inches on a 64-inch class printer.

  • Epson I3200-A1 printheads, from 2 to 15 heads depending on the model.

  • A 3-liter continuous bulk ink system with siphon positive-pressure ink supply, built for long, unattended runs.

  • Inflatable-roller automatic feeding and take-up, which Fedar says manages large jumbo paper rolls and rewinds printed rolls tightly.

  • Auto-capping and moisturizing to protect the printheads between jobs.

  • RIP compatibility with Neostampa, Ergosoft, Flexi and Wasatch.

  • Built for 24/7 production, as Fedar describes the platform.

In practice, the extra width lets you nest more panels across each row, and bulk ink plus jumbo-roll handling cut the stops that slow a 64-inch printer on long runs. The head count sets how fast the paper comes out.

Fedar 1.9 m sublimation printers compared

Model

Printheads

Speeds listed on Impact USA model page

Best fit

2 x Epson I3200-A1

2 pass 98 m²/h; 3 pass 64 m²/h; 4 pass 50 m²/h; 6 pass 32 m²/h

First step from 64" into 1.9 m roll-to-roll

4 x Epson I3200-A1

2 pass 170 m²/h; 3 pass 110 m²/h; 4 pass 85 m²/h

Sportswear and textile production

4 x Epson I3200-A1

2 pass 170 m²/h; 3 pass 110 m²/h; 4 pass 85 m²/h

Long runs on large paper rolls (heavy-duty paper feed and take-up)

8 x Epson I3200-A1

370 m²/h

High-speed textile and soft signage

15 x Epson I3200-A1

1 pass 610 m²/h (240 x 1800 dpi); 1 pass 430 m²/h (360 x 1800 dpi); 2 pass 300 m²/h (240 x 3600 dpi); 2 pass 220 m²/h (360 x 3600 dpi)

Maximum throughput for industrial volume

For reference, 1 m² is about 10.8 sq ft. Listed speeds are manufacturer figures. Real output depends on the print mode, paper, ink load and RIP settings. Confirm the current configuration with our team before you order.

How to choose a head count

FD1900: the first step up

The FD1900 is the natural first move for a shop coming off one 64-inch printer. You get 1.9 m width, bulk ink and jumbo-roll handling with two I3200-A1 heads. That's a big change in workflow without jumping straight to industrial volume. A common approach is to keep the 64-inch printer for sampling, short runs and specialty work, and move long production runs to the FD1900.

FD5194E and FD6194E: the production middle

With four heads, the FD5194E and FD6194E list the same speeds. The difference is paper handling. The FD6194E is our heavy-duty choice because its paper feeding and take-up system is built to handle large rolls of sublimation transfer paper and rewind printed rolls tightly. That means fewer roll changes on long jobs. If your work is long runs of team uniforms, fabric yardage or banner material, look at the FD6194E. If your jobs are more varied, the FD5194E covers sportswear and textile production well.

FD5198E: high-speed textile and soft signage

The eight-head FD5198E is built for shops where the printer has to feed several presses or a dedicated soft-signage line. It suits high-volume sportswear, flags and display graphics where turnaround time decides who wins the order.

FD51915E: maximum throughput

With 15 heads, the FD51915E is our highest-output 1.9 m sublimation printer. It's for operations running near-continuous production, where the bottleneck has moved to pressing, cutting and sewing rather than printing.

64-inch vs 1.9 m: an honest comparison

A 64-inch printer is still the right tool for many shops. Here's how the two classes differ:

  • Width: the Mutoh XpertJet 1642WR Pro prints up to 63.6 inches (Mutoh spec sheet). The Fedar 1.9 m platform prints up to 1,900 mm, about 75 inches.

  • Ink supply: 64-inch printers typically run ink bags or cartridges. The 1642WR Pro uses Mutoh DH21 ink in 1,000 ml or 2,200 ml bags. The Fedar platform uses a 3-liter continuous bulk ink system.

  • Roll handling: the 1642WR Pro takes rolls up to 66 lb, with an optional heavy-duty take-up for up to 220 lb. The Fedar platform uses inflatable-roller automatic feed and take-up designed for jumbo paper rolls.

  • Footprint and power: a 64-inch printer fits a smaller room; Mutoh lists the 1642WR Pro for AC 100–120V or 200–240V. The Fedar 4-head models list 210–230 VAC, 16 A, with a 1,000 W printer and an optional 3,500 W dryer. The FD1900 machine size is 2940 x 850 x 1550 mm with a net weight of 240 kg. Plan your electrical work and floor space before you order.

  • Environment: Fedar lists 20–35°C and 45–65% humidity. Sublimation paper and I3200 heads both do best in a controlled room.

  • Workflow: a 64-inch printer is easy to switch between jobs and paper types. A 1.9 m system is most efficient on long runs of consistent work.

Stay at 64 inches (or add a second 64-inch printer) if your volume is growing but mixed, your space or power is limited, or you want two smaller printers for redundancy. Step up to 1.9 m if your work is long, repeatable runs, your layouts need more width, and printing is clearly the bottleneck.

Plan the whole line, not just the printer

  • Press capacity: a faster printer only helps if your calender or heat presses can keep up with the transfer paper.

  • Paper: high-volume printing calls for jumbo rolls. See Impact FHD and Swift transfer paper and our large-format sublimation and transfer paper guide.

  • Ink: Radiant sublimation ink is made for printers with Epson heads, including the I3200. It's a drop-in replacement for Kiian Hi-Pro. Radiant is not Kiian ink, and Impact USA and Radiant are not affiliated with Kiian.

  • RIP and computer: Fedar lists Windows 11 64-bit with an Intel i5/i7, at least 8 GB of memory and Gigabit Ethernet. Compare RIP software options.

  • Installation and training: both are paid services, quoted separately with your printer. They can cover setup, ink fill, color profiles for your paper and operator training on daily maintenance. We confirm the exact scope with your quote.

See a Fedar system run before you decide

The fastest way to know whether you've outgrown 64 inches is to print your own jobs on a 1.9 m system and compare the results. Our showroom is at 1590 S Milliken Ave, Suite E, Ontario, California 91761, serving shops across Southern California and the US. Bring your files and your current production numbers, and we'll help you choose between staying at 64 inches, adding a second printer or stepping up to Fedar.

FAQ

How wide is a 1.9 m sublimation printer in inches?

1,900 mm is about 75 inches. The Fedar FD1900, FD5194E, FD6194E, FD5198E and FD51915E all list a 1,900 mm width.

What's the difference between the FD5194E and the FD6194E?

Both have four Epson I3200-A1 heads and list the same speeds. The FD6194E is the heavy-duty model: its paper feeding and take-up system is built to handle large rolls of sublimation transfer paper.

Should I replace my 64-inch printer or keep it?

A common approach is to keep it for samples, short runs and specialty paper, and move long production runs to the 1.9 m system. We can help you plan both.

Which RIP software works with Fedar sublimation printers?

Fedar lists Neostampa, Ergosoft, Flexi and Wasatch.

Is installation included?

Installation and training are paid services, quoted separately. Call 844-571-8171 for details.

Comments


bottom of page